When there is less stamping oil in a high-speed punch press, a series of problems will arise, mainly including the following aspects:
1. The stamping oil of the punch press is not only used for cooling, but also for lubricating various moving parts. If the stamping oil is insufficient, the friction of the moving parts of the punch press will increase, resulting in increased wear, reduced lubrication effect, and may even cause overheating and failure.
2. The stamping oil of the punch press can usually help cool the equipment and maintain the working temperature. If the amount of stamping oil is insufficient and the heat dissipation effect is poor, the temperature of the equipment may be too high, resulting in excessive wear or performance degradation of mechanical parts, and may even burn the motor or other important components.
3. Due to the lack of sufficient lubrication and cooling, the working efficiency of the punch press may decrease. The equipment may stop or run unsmoothly, affecting the continuity of production.
4. When the stamping oil is insufficient, the mold and workpiece surface are not well protected, and scratches, wear or deformation are prone to occur, resulting in reduced workpiece quality and may accelerate mold damage.
5. Due to insufficient oil, the moving parts of the punch press cannot be effectively protected and lubricated, which may cause equipment parts to become stuck, break, and other faults, increasing the cost of repair and replacement.
6. When the equipment is running without sufficient lubrication, mechanical friction and vibration increase, which may cause a significant increase in noise and affect the working environment.
Therefore, keeping the stamping oil sufficient and clean is the key to ensure the smooth operation of the high-speed punch press. Check the oil level and quality regularly, and add or replace the stamping oil in time to ensure the normal operation of the equipment and extend its service life.
